Liberty USERS GUIDE
17
Cell Mode
Use to connect a hands free cable from a cell phone to the cell phone
socket.
Control
Mode
Local
Gain of both input channels are adjusted by the two front panel
controls on the “local” Liberty.
Master
A pair of Liberty's can be set up to allow the “master” to control the
input gain of the “slave.” The remote Liberty has the volume mode set
to “slave.” Adjusting the Input controls on the “master” varies the
“slave” input gain.
Slave
Set the remote unit to “slave” for control by the “master” Liberty.
Front panel controls are disabled.
Toolbox
Input gain can be adjusted using the Toolbox application. “Toolbox”
mode can be selected on the Liberty or by clicking on the “Setup for
T-box” button in the application. Front panel controls are disabled.
IGC Mode
On
Enables the Intelligent Gain Control.
Off
Disables the Intelligent Gain Control.
POTS
Codec
Music
Provides the highest quality when bit rates are 24,000 and above. The
codec will operate 9,600- 33,600bps.
Speech
Used for 16.800bps.
Serial Port
Toolbox
Configures the serial port for use with a Computer using the
Toolbox
software.
Data
Use for low speed (200bps) data applications such as remote control or intercom
using a TTY terminal.
Disable
Disables the serial port for use with the Toolbox application.
Auto Reneg
No
(Disable)
Setting for live program links. Prevents data renegotiation if line conditions change.
Note:
Use of auto-renegotiation can cause unexpected program breaks
with changes in line conditions.
Up only
Uses higher bit rate with better line: LQ above 80%.
Down Only
Lower bit rate used as LQ below 30%. Some Hi.fi loss.
POTS Auto
Ans
Yes
(Enable)
Liberty automatically answers incoming calls.
Disable
Liberty will not automatically answers incoming calls.
POTS
Redial
No
(D
isable)
If dialed number is busy, Liberty will not redial.
Enable
If dialed number is busy, Liberty redials the number for a selectable
number of retries.
Summary of Contents for Liberty
Page 1: ...LIBERTYTM UsersGuide ...
