Liberty USERS GUIDE
20
4 Up & Down
Auto renegotiation as line conditions vary.
03
Max B it rate
33600
Bit Rate varies
with MENU
NAVIGATION
KNOB
Sets the maximum bit rate at which the Liberty will attempt a
connection. Reducing this value improves the reliability of the
connection on poor quality lines.
04 Modem
Monitor
Yes
(Enable)
Enables the modem dialing and connection process to be heard
through the headphones.
Disable
Disables the modem dialing and connection process to be
heard through the headphones.
05 Negotiate
Methd
V8
Normally V8 (cancel Telco echo suppression). Don’t alter!
V34
06 Exit to
Setup
Sub Menus of 04 Dialing Setup
01 POTS
Redial
No
(D
isable)
If dialed number is busy, Liberty will not redial.
Enable
If dialed number is busy, Liberty redials the number for a selectable
number of retries.
02 POTS
Reconnect
No
(Disable)
If a link fails, Liberty will not hang up and attempt to reconnect
with the remote Liberty.
Enable
If a link fails, Liberty will hang up and attempt to reconnect wit h
the remote Liberty. Use with auto answer.
03 Dial Tone
Detect
Liberty waits until a dial tone is present before dialing.
Ignore
Liberty will not wait until a dial tone is present before dialing. Use
this setting if there is any difficulty detection dial tone.
04 Connect
tones
Ignore
Liberty does not check for a telephone system connection tone at
the conclusion of dialing. (e.g. “busy” tone).
Detect
Liberty checks for a telephone system connection tones at the
conclusion of dialing. (e.g. “busy” tone).
05 Set Prefix
mode
Ignore
Does not add an extra number (Prefix) when dialing.
Detect
Inserts a prefix (such as a 9 or 001) to the dialed number. Useful
Summary of Contents for Liberty
Page 1: ...LIBERTYTM UsersGuide ...
