Liberty USERS GUIDE
18
POTS
Reconnect
No
(Disable)
If a link fails, Liberty will not hang up and attempt to reconnect with
the remote Liberty.
Enable
If a link fails, Liberty will hang up and attempt to reconnect with the
remote Liberty. Use with auto answer.
Prefix
Enable
No
(D
isable)
Liberty will not dial the number stored in the Prefix memory before
dialing the number entered via the keypad or from the phone book
memory.
Enable
Liberty dials the number stored in the Prefix memory before dialing a number
entered via the keypad or from the phone book memory.
Note:
The prefix must have been entered in memory for this function to work
(Useful for dialing remote and international area codes).
Dial Tone
Detect
Liberty waits until a dial tone is present before dialing.
Ignore
Liberty will not wait until a dial tone is present before dialing. Use
this setting if there is any difficulty detection dial tone.
Con Tones
Ignore
Liberty does not check for a telephone system connection tone at the
conclusion of dialing. (e.g. “busy” tone).
Detect
Liberty checks for a telephone system connection tones at the
conclusion of dialing. (e.g. “busy” tone).
Max
Bit rate
33600
Bit Rate
varies with
MENU
NAVIGATI
ON KNOB
Sets the maximum bit rate at which the Liberty will attempt a
connection. Reducing this value improves the reliability of the
connection on poor quality lines.
Modem
Monitor
Yes
(Enable)
Enables the modem dialing and connection process to be heard
through the headphones.
Disable
Disables the modem dialing and connection process to be heard
through the headphones.
Pause time
2 seconds
Seconds
vary with
MENU
NAVIGATI
ON KNOB
Determines the length of any dialing pauses, if any are inserted into
the telephone number. Made by holding the “#” key until a comma
appears after the digit on the LCD display. This feature is useful
when dialing through a PBX.
Options: 1-10 seconds.
Dial
Method
Tone
For tone (DTMF) dialing.
Pulse
For Pulse dialing.
Summary of Contents for Liberty
Page 1: ...LIBERTYTM UsersGuide ...
