Muratec MFX-2500, Operating Instructions Manual, Page: 59 / 103

Beyond the Basics
Using the power of programmable one-touch keys
In order to complete some operations on your machine, you may have to follow sev-
eral steps and press several different buttons. But programming your machine’s
one-touch keys (79–84) can reduce those many steps to a simple press of a key.
You can “teach” the one-touch keys to carry out any of the following operations:
Communications functions:
• Delayed transmission (explained on pages 2.10–2.11)
• Broadcasting (pages 2.9)
• Regular polling (not continuous) (page 2.22)
• Batch transmission (pages 2.12–2.14)
• F-Code transmission (page 2.35)
• F-Code polling (pages 2.35–2.36)
Programming a delayed transmission
To program a delayed transmission into a programmable one-touch key:
1
Press
MENU
,
C
, [Enter].
The
LCD
shows the programmable one-touch
number list.
2
Select the programmable one-touch number
that you want to program or change.
Note: If you’re changing a previously stored command:
If your previous command for this key was for a delayed operation
and you want to keep this key programmed for a delayed operation,
use these instructions to make changes.
If you want to assign this key to a completely different operation,
overwrite a previously stored command to the new one.
3
Press [Enter].
4
Use the numeric keypad to enter the fax
number exactly as your machine should dial
it, including whatever codes your phone sys-
tem requires. The number can be up to 40
characters in length.
5
Press [Enter].
6
Select “Delayed Tx” and press [Enter].
7
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a
certain time on a certain day of
the month. (For example, “Do
this at 5:05
PM
on the 30th.”)
To select this option, use the
numeric keypad to enter the
date and time when the fax
should perform the command.
Option 2: Perform the command at a cer-
tain time each day you press the
key. (For example, “Do this at
5:05
PM
today.”)
To select this option, use the
numeric keypad to enter 0, 0
and then the time the fax should
perform the command.
8
Press [Enter], [Exit].
9
The machine will return to step 2.
Note: When the delayed transmission is programmed, the symbol is
appeared in the programmable one-touch number list on the
LCD
.
If you want to enter or change another key’s programming, repeat steps 2-9.
If you do not want to enter or change any other key’s programming, press
RESET
. Your machine returns to standby mode.
2.37
Programmable one-touch keys