Figure 8.6.6
The second
System Management
tab displays and accepts inputs for the PSK (WPA2) Passphrases for
WLAN configurations 1, 2, 3 and Ad-Hoc. The community strings for
Get
,
Set
and
Trap
are also displayed
on this tab, plus the related trap
Source
and
Destination
ports.
Figure 8.6.7
The
RFM MIB
tab displays and accepts inputs related to the basic MIB OID application parameters. The
Sensor Server IP Address
can be set and applied in this tab as an alternative to Step 7 in Section 8.3.
The
Auto Report Interval
can be increased over the default 10 second interval to conserve battery power
where the values or states of the sensor inputs change slowly.
©2009-2015 by Murata Electronics N.A., Inc.
HN-210D/X, HN-214 D/X Rev. 2.0 01-16-15
Page 78 of 101
www.murata.com
