Important Regulatory Information
RFM Product FCC ID: HSW-WSN802G
IC 4492A-WSN802G
Note:
This unit has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-
struction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to cor-
rect the interference at their expense.
The WSN802G has been designed to operate with any dipole antenna of up to 9 dBi of gain, or any patch
antenna of up to 12 dBi gain.
See Section 3.10 of this manual for regulatory notices and labeling requirements. Changes or modifica-
tions to a WSN802G not expressly approved by RFM may void the user’s authority to operate the
module.
Important Export Information
ECCN: 5A002.a.1 ENC
CCATS: G073573
The WSN802G products are classified under ECCN codes as 5A002.a.1 class devices and carry and
ENC encryption exception. RFM has had the WSN802G products pre-screened which allows exports to
countries listed in Supplement 3 to Part 740 of the Export Administration Requirements
License Excep-
tion ENC Favorable Treatment Countries
. When exporting products containing any of the WSN802G
products to this list of countries, CCATS G073573 should be referenced.
Export of the WSN802G products or products containing any of the WSN802G products to other coun-
tries will require additional review and may be prohibited.
This information is provided as a guide to exporting WSN802G-based products but it is the responsibility
of the entity exporting WSN802G products or devices to determine their actual requirements.
©2009-2015 by Murata Electronics N.A., Inc.
WSN802G Rev. 2.0 01-27-15
www.murata.com
