The WSNConfig utility included with the developer’s kit is designed to operate as a commissioning utility
for the WSN802G. The WSNConfig utility allows for each node to be configured independently or as a
whole. Individual settings may be configured or a list of configuration parameters can be queued for
transmission when the node or nodes wake up and issue the Config Trap. Alternatively, a third party
SNMP server or utility may be used to serve the same function.
7.2 SNMP Parameter OIDs
Tables 7.2.1 through 7.2.7 detail the SNMP parameter OIDs supported by the WSN802G firmware Rev F
or later with left-side fields of
1.3.6.1.4.1.28295.1.1
. The remaining OID fields for each parameter are
shown in the left column of each table.
Shown below is the most commonly occurring sequence of SNMP messages between a module and its
access point/server. The sequence of messages begins with a Config Trap from the module. In most
cases the server will not need to update the module’s configuration, so it will send a ConfigComplete
message which allows the module to immediately return to sleep mode. The module acknowledges the
message and returns to sleep.
Config Trap from Module:
04 08 47 53 4E 5F 54 52 41 50 A4 3A 06 09 2B 06
01 04 01 81 DD 07 01 40 04 C0 A8 03 A6 02 01 06
02 01 02 43 04 80 86 C4 6B 30 1B 30 82 00 17 06
0D 2B 06 01 04 01 81 DD 07 01 01 04 02 02 04 06
00 30 66 50 01 00
ConfigComplete from Access Point/Server:
04 07 47 53 4E 5F 53 45 54 A3 20 02 02 00 6A 02
01 00 02 01 00 30 14 30 12 06 0D 2B 06 01 04 01
81 D0 70 10 10 40 60 00 20 01 01
ConfigComplete ACK from Module:
04 07 47 53 4E 5F 53 45 54 A2 20 02 02 00 6A 02
01 00 02 01 00 30 14 30 12 06 0D 2B 06 01 04 01
81 DD 07 01 01 04 06 00 02 01 01
Generic Configuration Parameter (genericcfg) OIDs:
1.3.6.1.4.1.28295.1.1 + OID End
OID End
Name
R/W
Size, bytes
Range
Default
.1.6.0
gsnRebootNode
W
4
0..1
N/A
.1.10.0
gsnBatteryReadFrequency
R/W
4
0..1023
0x00000001 (read on each TX)
.1.12.0
gsnBatteryWarning-
LevelInMVolt
R/W
4
0..1023
0x000008FC (2300 mV)
.1.13.0
gsnBatteryStandby-
LevelInMVolt
R/W
4
0..1023
0x000009F6 (2550 mV)
.1.14.0
gsnBatteryRFirstBoot-
StandbyLevelInMVolt
R/W
4
0..1023
0x000008FC (2550 mV)
.1.16.0
gsnDisableStdBy
W
4
0..2
N/A
.1.17.0
gsnSystemTime
R
8
ASCII String
N/A
Table 7.2.1
©2009-2015 by Murata Electronics N.A., Inc.
HN-210D/X, HN-214 D/X Rev. 2.0 01-16-15
Page 42 of 101
www.murata.com
