© Munters Corporation, July 2021
12
QM1095r1
Figure 5B
Figure 6
Installation Instructions
Chapter 2
Step 5B
Stand cone sections on end and curl ends around to form cone so that the nuts are outside and tabs on inside.
Insert remaining tabs into slots so tabs are inside cone and fasten final joint using (1) Bolt [A] and Nut [B], with
nut on inside of cone. At the inner pair of holes fasten using (1) Bolt [A] and Nut [B] with bolt head on inside of
cone.
See Figure 5B.
Leave all bolts and nuts loose at this time.
Bolt [A]
Nut [B]
Bolt [A]
Nut [B]
Step 6
Install cone onto fan by putting cone over fan orifice and line up inner holes of cone with holes in fan orifice.
Fasten cone to fan orifice using (12) Bolt [A], Washer [C] and Nut [B] with bolt and washer on inside of fan
orifice and nut on outside of cone.
See Figure 6.
Bolt [A]
Nut [B]
Washer [C]
Hole in Fan Orifi ce
