© Munters Corporation, July 2021
10
QM1095r1
Installation Instructions
Chapter 2
Step 3A
Insert fan into the framed opening from the inside. While holding fan tight to framing, fasten top of fan
with (5) Mounting Screw/Bolt (not provided).
See Figure 3A.
Next, fasten bottom of fan, then both
sides with (5) Mounting Screw/Bolt (not provided) per side. Install flashing around opening tight to fan
and caulk around fan to seal.
Figure 3B
Wall Framing
2" Minimum Framing for fan, Bottom
W
all Opening (See Char
t on P
age 5)
4" Minimum Framing for
fan, Top and Sides
Wall Framing
Figure 3A
OUTSIDE
INSIDE
Mounting Screw/Bolt
(not provided)
Step 3B
If fan needs to be mounted, so that shutter does not stick into building then frame fan as shown in
Figure 3B.
Top
and sides require 4" minimum and bottom requires 2" minimum.
Note:
Once Fan is installed in wall,
remove Lifting Brackets from
Fan and install in next Fan
for installation.
