Multitone RPR 551IS, Technical Manual

Page: 1 / 127

Page 1
AMENDMENT INSTRUCTION NO. 234a
AL2 TO TM1188 ISSUE 1
RPR 550IS SERIES PAGING RECEIVERS
OCTOBER 1998
PLEASE NOTE THAT THIS AMENDMENT INSTRUCTION (No. 234a) REPLACES
INSTRUCTION No. 234 WHICH HAD A PAGE ERROR. PLEASE DESTROY ANY
COPIES OF INSTRUCTION 234 YOU MAY HAVE RECEIVED AND USE THE
PAGES SUPPLIED WITH THIS INSTRUCTION SHEET INSTEAD.
The attached amendment should be incorporated in the above Technical Manual
as soon as possible.
In line with the company policy of continued technical advancement, changes to
circuit diagrams and component layout diagrams are continually taking place. It is
not company policy that the technical manual should cover all previous issues of
products but only the latest design state. To this end, where an amendment
changes either the circuit diagram or component layout diagram, it may be prudent
to archive the previous diagrams, particularly if your product is of old design.
AFFECTED
PAGES
CHANGE
(i)/(ii) Change to address.
(iii)/(iv) AL2 amendments recorded.
(v)/(vi) AL2 amendments recorded. Warnings updated.
(vii)/(viii) Ambiguity in Caution removed. Updates to FCC compliance
statement.
1-1/1-2 Contents List updated.
1-5/1-6 Para 9. New Table added to sub-para b). Sub-paragraphs c)
and d) removed.
1-9/1-10 Existing Table 4 now re-numbered Table 5.
2-13/2-14 Change to wording of Warning.
5-31/5-32 Para 24: Warning added.