Chapter 5 – Using the RouteFinder's Web Management Software
Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B)
46
Networks & Services > Service Configuration
Service Configuration
Name
Enter the name of network or host you want added to the list. This name has to unique; in other
words, it should not be present in the displayed list. A space cannot be used in the name; it is
considered an invalid character. After you have entered the name, click the
Add
button.
Protocol
Select from the following protocols:
TCP, UDP, TCP & UDP, ICMP, AH,
and
ESP
. When you select
one of the protocols, the fields to the right will change according to the protocol selected.
TCP, UDP, and TCP& UDP
S-Port/Client
Enter the source port for the service. The entry options are a single port (e.g. 80), a list of
port numbers separated by commas (e.g. 25, 80, 110), or a port range (e.g. 1024:64000)
separated by a colon (
:
).
D-Port/Server
Enter the Destination port.
ICMP
ICMP Type
Choose the Type from the drop down box.
ICMP Code
Choose the Code from the drop down box.
AH and ESP
SPI Value
Enter the SPI value.
Editing and Deleting User-Added Services
There are options for editing or deleting the user added services. However, there are some standard
services which cannot be edited or deleted. If the service is used by the Packet Filter rules, SNAT, or
DNAT, it cannot be deleted.
For editing any user-defined service, the
Edit
button has to be clicked to get the fields corresponding
to the service entry.
Edit
By clicking
Edit
in the Options column, the information is loaded into the entry menu of
the
Edit Service
screen. You can then edit the entry. You can edit user-added services
only. The entries can be saved using the
Save
button.
Delete
By clicking
Delete
in the Options column, the service is deleted from the Services table.
Changes can be saved using the
Save
button.
Notes About Protocols
•
TCP & UDP
allow both protocols to be active at the same time.
•
The
ICMP
protocol is necessary to test network connections and RouteFinder functionality, as
well as for diagnostic purposes. In the
Packet Filter > ICMP
menu you can enable
ICMP
Forwarding
between networks, as well as RouteFinder ICMP reception (e.g., to allow
ping
support).
•
The
ESP
protocol is required for Virtual Private Network (VPN).
•
The
AH
protocol is required for Virtual Private Network (VPN).
•
For
AH
and
ESP
, the
SPI
is a whole number between 256 and 65536, which has been mutually
agreed upon by the communication partners. Values below 256 are reserved by the Internet
Assigned Numbers Authority (IANA).
