Multitech PROXYSERVER MTPSR1-120 User Manual Download Page 2 | Manualshive

Page: 2 / 110

background image

User Guide

S0000011 Revision C

Dual Ethernet ProxyServer (Model MTPSR1-120)

This publication may not be reproduced, in whole or in part, without prior expressed written permission from
Multi-Tech Systems, Inc. All rights reserved.

Copyright © 2000, by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes.

Record of Revisions

Revision

Description

A

Manual released. All pages at revision A.

(9/4/98)

B

Manual revised for software version 2.00. All pages at Revision B.

(2/19/99)

C

Manual revised for software version 3.00. All pages at Revision C.

(2/15/2000)

Patents

This Product is covered by one or more of the following U.S. Patent Numbers: 5.301.274; 5.309.562;
5.355.365; 5.355.653; 5.452.289; 5.453.986. Other Patents Pending.

TRADEMARK

Trademark of Multi-Tech Systems, Inc. is the Multi-Tech logo.
Windows is a registered trademark of Microsoft.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112

(763) 785-3500 or (800) 328-9717

Fax 763-785-9874

Tech Support (800) 972-2439

Internet Address:

http://www.multitech.com

«
1
2
3
4
...
»

Summary of Contents for PROXYSERVER MTPSR1-120















































































































Reviews:

No comments

Related manuals for PROXYSERVER MTPSR1-120

SUPERO SuperServer 6026TT-GIBQRF

Brand: Supero Pages: 104

Brand: Axis Pages: 10

Brand: Vxl Pages: 2

Brand: MISUMI Pages: 18

ENTERPRISE SERVER FOR NOVELL GROUPWISE

Brand: Blackberry Pages: 73

Force10 MXL Blade

Brand: Dell Pages: 2

Brand: Spectra Pages: 184

Brand: CNET Pages: 14

Brand: Axis Pages: 129

Brand: Meinberg Pages: 55

LASERSHARE PS-MIO

Brand: BayTech Pages: 133

MAP-9101-10 Series

Brand: decrane aerospace Pages: 30

Brand: Intel Pages: 67

X38ML - Server Board Motherboard

Brand: Intel Pages: 132

Brand: Kommander Pages: 124

Brand: Repotec Pages: 41

Brand: NetComm Pages: 76

Brand: Gigabyte Pages: 102

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands