Multitech PROXYSERVER MTPSR1-120, User Manual

Page: 69 / 110

MTPSR1-120 69
Chapter 6 - Remote Configuration
Click OK when you are satisfied with your selections.
6. Run the Proxy Server Configuration program. Click Start | Programs | Firewall | Firewall
Configuration, or double-click the Firewall Configuration icon in the Firewall program group.
7. The Dialing Router dialog box is displayed while software is dialing the remote Firewall.
8. The Reading Setup dialog box is displayed.
9. The Firewall Setup menu is displayed. This is the dialog box of the remote Firewall. Refer to the on-
line Helps provided with your software for a description of each dialog box and field within a dialog
box.
10. After you have changed the configuration of the remote Firewall, click Download Setup to update
the configuration. The remote Firewall will be brought down, the new configuration written to the unit,
and the unit will reboot.
11. Click Exit when the downloading is complete.
12. The Hangup connection with Router? dialog box is displayed
Click Yes to disconnect the phone connection to the remote site.
13. If the same telephone number is not going to be used again in the immediate future, you may want to
remove it from the Port Setup dialog box.
14. At the remote site, reconnect the Firewall to the serial port of the PC and from the Firewall program
group double-click the Firewall Configuration icon to verify that the Firewall is running.