Owner’s Manual
42
MT5634ZPX-PCI
Command:
\G
n
Modem Port Flow Control
Values:
n
= 0
Default:
0
Description: \G0
Returns an
OK
for backward compatibility with some
software.
\G1
Not supportedresponds ERROR.
Command:
\J
n
Data Buffer Control
Values:
n
= 0
Default:
0
Description: \J0
Enable data bufferserial port speed is independent of
connect speed.
\J1
Not supportedresponds ERROR.
Command:
\K
n
Set Break Control
Values:
n
= 5
Default:
5
Description: \K5
Modem sends break signal received from the DTE to the
remote modem.
Command:
\N
n
Error Correction Mode Selection
Values:
n
= 05, or 7
Default:
3
Description: \N0
Non-error correction mode with data buffering
(same as
&Q6
).
\N1
Direct mode.
\N2
MNP reliable mode.
\N3
V.42/MNP auto-reliable mode.
\N4
V.42 reliable mode.
\N5
V.42, MNP, or non-error correction (same as
\N3
).
\N7
V.42, MNP, or non-error correction (same as
\N3
).
Command:
\Q
n
Local Flow Control Selection
Values:
n
= 0, 1, or 3
Default:
3
Description: \Q0
Disable flow control (same as
&K0
).
\Q1
XON/XOFF software flow control (same as
&K4
).
\Q2
CTS-only flow control. Not supportedresponds ERROR.
\Q3
RTS/CTS hardware flow control (same as
&K3
).
Summary of Contents for MultiModem ZPX MT5634ZPX-PCI Series
