Multitech MultiModem ZPX MT5634ZPX-PCI Series, Owner'S Manual

Page: 17 / 88

2 Installation
MT5634ZPX-PCI 17
Installing the MultiModemZPX-PCI
Installating the MultiModemZPX-PCI requires you to open your
computer. Please consult your computer manual in addition to the
following instructions:
1. Turn off the computer and unplug it. Failure to do so may result in
damage to both the MultiModemZPX-PCI and the computer. Do
not turn on the computer until the instructions tell you to do so.
2. Remove the cover from the computer as instructed in the computer
manual.
3. Select an empty PCI expansion slot. Remove the expansion slot
cover and save the retaining screw.
4. Before handling the MultiModemZPX-PCI, discharge static in
your body by touching a metal piece of the computer chassis.
Carefully remove the MultiModemZPX-PCI from its antistatic
bag, handling it only by the mounting bracket and edges. Do not
touch the gold-plated connectors along the bottom edge.
5. Place the MultiModemZPX-PCI directly above the expansion slot
and gently, but firmly, push it into the connector until the card’s
retaining bracket is flush against the computer chassis.
6. Fasten the retaining bracket to the computer chassis with the screw
saved in step 3.
7. Replace the cover of the computer.