Multitech FaxFinder FF240 Administrator'S Manual Download Page 54

Page: 54 / 98

ADVANCED CONFIGURATION

FaxFinder

Fax Server FF240-IP, FF240, FF440, FF840 Administrator Guide

Removing Approvers

To remove approvers or a reminder time:

Click

Fax Configuration > Outbound Approvals

Click

Delete

for the approver or reminder time that you want to delete.

Enabling the Outbound Approval Report

To generate and schedule fax approval reports that are sent to the Approvers:

Click

Fax Configuration > Outbound Approval.

Check

Enabled

under Outbound Approval Report.

Select either

CSV

XML

for the report format. CSV is the default.

Set the report frequency.

Hours

Select an hour for the report to run.

Minutes

Select minutes to set intervals that are not on the hour.

Day of Month

Select Every Day of Month or a specific date.

Month

Select Every Month or specific months.

Day of Week

Select Every Day of Week or select specific days.

Click

Save.

Example Report Frequency Settings

Run report every Sunday at 7:25 pm:

Run report at 11:00 am on the first every month:

Minutes is set to 25

Minutes is set to 0

Hours is set to 7pm

Hours is set to 11am

Day of Month is set to Every day of month

Day of Month is set to 1

Month is set to Every month

Day of Week is set to Sunday

Day of Week is set to Every day of week

Configuring Store & Forward Fax (T.37)

Store & Forward Fax allows users to send emails as faxes using the T.37 format. This section describes T.37
parameters. For more information on using T.37, refer to

T.37 Advanced Usage

Note:

Click

Defaults

to restore the factory default settings.

Click

Fax Configuration > Store & Forward Fax (T.37)

Check

Enable T.37.

Set parameters and click

Save

Summary of Contents for FaxFinder FF240



































































































Search results

Summary of Contents for FaxFinder FF240

Reviews:

Related manuals for FaxFinder FF240

Brands by name

Popular brands

Multitech FaxFinder FF240, Administrator'S Manual

Search results

Summary of Contents for FaxFinder FF240

Reviews:

Related manuals for FaxFinder FF240

Brands by name

Popular brands