Multitech FaxFinder FF240 Administrator'S Manual Download Page 15 | Manualshive

Page: 15 / 98

background image

BASIC FAXFINDER CONFIGURATION

FaxFinder

®

Fax Server FF240-IP, FF240, FF440, FF840 Administrator Guide

15

Field

Description

Password

If you checked Authorization Required, enter the required password.

Confirm Password

Re-enter the authorization password.

Local Port

Enter the local port used for SIP. Default is 5060.

SIP Proxy Port

Enter the SIP Proxy port, if required. Default is 5060.

Loose Routing

Select on if your network allows loose source routing. Default is off, used if your network
requires strict source routing.

Use Registrar

Check this if the FaxFinder needs to use a Registrar for SIP call routing.

Registrar

If you checked Use Registrar, enter the SIP Registrar IP address.

Registrar Port

If you checked Use Registrar, enter the Registrar port. Default is 5060.

Expires

If you checked Use Registrar, enter the registrar expiration time in seconds. Default is
3600 seconds.

T.38

Fax ID

Enter the Fax ID you want the FaxFinder to send out.

Fax Method

Select the outbound fax method. Options are T.38 Re-invite, T.38 Direct, and T.30 Pass
Through. Default is T.38 Re-invite. Inbound faxes can use either option automatically.

Fax Codec

Check the box for each outbound fax codec you want in use. G.711 A-law and G.711 µ-law
are available depending on your Fax Method (T.38 Re-invite only). Inbound faxes can use
either option automatically. Both options are checked by default.

Redundancy Level

Enter a redundancy level for the FaxFinder. Default is 3.

Max Buffer

Enter the maximum buffer for FaxFinder to use. Default is 4000.

Channel Reservation

To reserve channels for specific use, enter the number of channels reserved for

Inbound

Only

or

Outbound Only

in these fields. Setting both fields to 0 configures all channels to

handle both incoming or outgoing faxes as needed. Default is 0 for both fields.

Max Rate

Select the maximum fax transmission rate for the channels from the drop-down list.
Options are: 2400, 4800, 9600, 12000, 14400, 16800, 19200, 21600, 24000, 28800, 31200,
33600. Default is 14400.

Error Correction

Check on to enable automatic fax error correction. Off turns off automatic error
correction. Default is on.

Dialing Rules

To apply dialing rules, select the rules from the drop down list. Refer to

Dialing Rules

Overview

for information on setting up dialing rules.

Jitter Buffer Delay

Enter the jitter buffer delay (in milliseconds) required by your network. Default is 300 ms.

Max Datagram

Enter the maximum datagram size your network allows. Default is 948.

Extension Length

Enter the extension length allowed for the channels.

Extension Source

Select the extension source to be used by the FaxFinder. Options are: SIP To Header or
SIP Diversion Header. Default is SIP To Header.

Extension Digits

Select the manner in which extension digits are used. Options are: Use All, Use First Only,
and Use Last Only. Default is Use All.

«
...
13
14
15
16
17
...
»

Summary of Contents for FaxFinder FF240



































































































Reviews:

No comments

Related manuals for FaxFinder FF240

Brand: Marq Pages: 24

Brand: Nilfisk-ALTO Pages: 84

Brand: Clarke Pages: 4

INSIDE-FOG FLUID

Brand: Safex Pages: 8

Brand: R.P.S. Corporation Pages: 42

Brand: BT Pages: 2

Brand: Duerkopp Adler Pages: 95

MICROMAG 17'' DISK PAD ASSIST

Brand: RPS Pages: 38

Brand: Consew Pages: 54

HAKOMATIC B 90 CL

Brand: HAKO Pages: 42

Brand: Karma Pages: 12

Advolution UHR 70-1700

Brand: Nilfisk-Advance Pages: 32

Brand: SunStar Pages: 36

Brand: Paitec Pages: 21

Brand: Panasonic Pages: 35

Brand: Panasonic Pages: 50

Brand: Panasonic Pages: 76

Brand: Panasonic Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands