Multitech CommPlete CC2400, System Installation And Quick Start Manual, Page: 99 / 113

2 Configuration Quick Start
99
Per Port Configuration
If you selected Per port config in step 50, you must individually allocate
valid IP addresses to all 30 EPRI ports. The ports must be set up sequentially,
beginning with port 1, as shown in the following example.
Port Number: 1
Port Number (-(previous), q (uit), <1>):
a. Press E
NTER
to set up port 1. A screen similar to the following one
appears:
Getting Port Info .......
Time out waiting for response
Port Number:1
Port Type:Client_to_LAN
Remote Address::0.0.0.0
Port Type:Client_to_LAN
Port Type
1. Client_to_LAN
2. LAN_to_LAN
Enter Selection (-(previous), q(uit), <1>):
b. Select whether the port will be used for Client-to-LAN
communications or LAN-to-LAN communications. If you select
Client_to_LAN, a screen similar to the following one appears:
Remote Address::0.0.0.0
Remote Address: (-(previous), q (uit), <0.0.0.0>):
c. Type a new IP address for the port or press E
NTER
to accept the
current IP address. A summary similar to the following one appears:
Port Number: 1
Port Type:Client_to_LAN
Remote Address::0.0.0.0
Config Port? (<y>, n):
d. Type y if you changed the port configuration; otherwise, type n.
e. Repeat steps a through d to set up each port.
When you finish configuring the port addresses, a summary of the
RASCard configuration appears:
IP Address:192.168.90.4
Subnet Mask:255.255.255.0
Default Gateway:192.168.90.1
Primary DNS Server:192.168.90.1
Backup DNS Server:0.0.0.0
Frame Type:TYPE_II
Address Method:Address pool
Address Pool Start:192.168.90.230
Address Pool End:192.168.90.253
Start 1st Exclusion:0.0.0.0
End 1st Exclusion:0.0.0.0