Multitech CommPlete CC2400, System Installation And Quick Start Manual, Page: 59 / 113

2 Configuration Quick Start
59
49. Type y and press E
NTER
to save your changes. Type n to cancel your
changes. If you answer y, it will not affect any current connections. The
following screen appears:
IP Address 192.168.4.182 stored
Trap IP Address 192.168.4.150 stored
Gateway IP Address 192.168.4.1 stored
Subnet mask 255.255.255.0 stored
Read Community public stored
Write Community public stored
Device Specific Setup
1. Controller Setup
2. Ras Setup
3. T1 Setup (Required)
4. E1 Setup (Required)
5. PRI Setup (Required)
Enter Selection (-(previous), q(uit), <2>): 2
RASCard Setup
Note: as you configure the RASCard, make note of your settings on the
E1 Site Information sheet.
50. Verify that all RASCards are turned on. Type 2 and press E
NTER
to set up
your RASCards. The following line appears:
Select a Ras Card (1A, 5A, 9A, 13A, -(previous), <d>(one)):
5A
51. Valid device numbers are listed in the option line. Type the device
number of the RASCard you want to set up and press E
NTER
. The Use
Settings from menu appears:
1. Use Active Settings (pre-configured card)
2. Use System Defaults (new card)
Enter Selection ( q(uit), <1>:
52. Type 1 or press ENTER if you want to use or modify the settings stored
in the currently selected RASCard. Type 2 if you want to use or modify
the default RAS settings. A screen similar to the following appears, with
the options displayed varying based on the Address Method selected:
Getting Ras Info ......
1. IP Address :0.0.0.0
2. Subnet Mask :255.255.255.0
3. Default Gateway :192.168.4.1
4. Primary DNS Server :0.0.0.0
5. Backup DNS Server :0.0.0.0
6. Frame Type :TYPE_II
7. Address Method :Address pool
8. Address Pool Start :192.168.4.200
9. Address Pool End :192.168.247
10.Start 1
s t
Exclusion :0.0.0.0
11.End 1
st
Exclusion :0.0.0.0
12.Start 2
n d
Exclusion :0.0.0.0
13.End 2
nd
Exclusion :0.0.0.0
14.RAS Express Password :**********
15.Protocol :Local
16.Primary Server :0.0.0.0
17.Secondary Server :0.0.0.0