2 Configuration Quick Start
97
local security (i.e., RASExpress security rather than RADIUS or
), leave these addresses set at the 0.0.0.0 default. When you
finish the second option, the Shared Secret Password option appears:
Primary Server (-(previous), q( uit), <0.0.0.0>):
Secondary Server (-(previous), q(uit), <0.0.0.0>):
Shared Secret Password (-(previous), q(uit), <********>):
53.
Type the shared secret password used by your security server and press
E
NTER
, or just press E
NTER
to accept the current password. Retype the
string to confirm that you typed it correctly, and press E
NTER
again. The
screen that appears next depends on whether you selected Address pool
or Per port config as your method of address allocation in step 50.
Address Pool Configuration
The following screen shows the start and end addresses of the
RASCard’s address pool, and the start and end addresses of two optional
exclusion ranges within the pool. By using both exclusion ranges, you
can, in effect, create three disconnected pools. Addresses from these
pools are allocated to users when they call. The pool should have one
address for each port controlled by the RASCard, typically 32 for a EPRI
RASCard.
Note:
Although EPRI utilizes only 30 ports, the RASCard recognizes all
32 modems present on the two MT5634HD16 cards. You must allow for
32 IP addresses or you will receive the message “not enough ips.”
Address Pool Start:192.168.4.200
Address Pool End:192.168.4.247
Start 1st Exclusion:0.0.0.0
End 1st Exclusion:0.0.0.0
Start 2nd Exclusion:0.0.0.0
End 2nd Exclusion:0.0.0.0
Address Pool Start (-(previous), q(uit), <192.168.4.200>):
a.
In the Address Pool Start option, type the first IP address in the
pool, or press E
NTER
to accept the current address. The next option
appears:
Address Pool Start (-(previous), q(uit),
<192.168.4.200>):
Address Pool End (-(previous), q(uit), <192.168.4.247>):
b.
In the Address Pool End option, type the last IP address in the pool,
or press E
NTER
to accept the current last address. The exclusion
options then appear:
Address Pool Start (-(previous), q(uit),
<192.168.4.200>):
Address Pool End (-(previous), q(uit), <192.168.4.247>):
Start 1st Exclusion (-(previous), q( uit), <0.0.0.0>):
End 1st Exclusion (-(previous), q(uit), <0.0.0.0>):
Start 2nd Exclusion (-(previous), q( uit), <0.0.0.0>):
End 2nd Exclusion (-(previous), q(uit), <0.0.0.0>):
Summary of Contents for CommPlete CC2400
