2 Configuration Quick Start
95
40.
Type 2 and press E
NTER
to set up your RASCards. The following line
appears:
Select a Ras Card (1A, 5A, 9A, 13A, -(previous), <d>(one)):
5A
Type the device number of the RASCard you want to set up, or press
E
NTER
to set up the currently selected RASCard. Valid device numbers
are listed in the option line.
41.
The Use settings from menu appears:
Use Settings from:
1. Use Active Settings (pre-configured card)
2. Use System Defaults (new card)
3. Use Stored Settings (swapping cards)
Enter Selection ( q(uit), <>: 1
42.
Type 1 or press E
NTER
if you want to use or modify the settings stored in
the currently selected RASCard. Type 2 if you want to set up a new card
using the system defaults. Type 3 to use stored settings. The controller
fetches and displays the following information:
Getting Ras Info ......
IP Address:0.0.0.0
Subnet Mask:255.255.255.0
Default Gateway:192.168.4.1
Primary DNS Server:0.0.0.0
Backup DNS Server:0.0.0.0
Frame Type:TYPE_II
Address Method:Address pool
IP Address (-(previous), q( uit), <0.0.0.0>):
43.
Type the IP address of the RASCard, for example 192.168.4.185, and
press E
NTER
. The Subnet Mask option appears:
IP Address (-(previous), q( uit), <192.168.4.185>):
Subnet Mask (-(previous), q (uit), <255.255.255.0>):
44.
Verify the subnet mask and press E
NTER
to accept the current mask, or
type a new mask and press E
NTER
. The Default Gateway option appears:
IP Address (-(previous), q( uit), <192.168.4.185>):
Subnet Mask (-(previous), q (uit), <255.255.255.0>):
Default Gateway (-(previous), q (uit), <192.168.4.1>):
45.
Verify the gateway address and press E
NTER
to accept the current
address, or type a new address and press E
NTER
. The Primary DNS
Server
option appears:
IP Address (-(previous), q( uit), <192.168.4.185>):
Subnet Mask (-(previous), q (uit), <255.255.255.0>):
Default Gateway (-(previous), q (uit), <192.168.4.1>):
Primary DNS Server (-(previous), q(uit), <0.0.0.0>):
46.
Type a new address for the primary DNS server or press E
NTER
to accept
the default address of 0.0.0.0. The Backup DNS Server option appears:
IP Address (-(previous), q( uit), <192.168.4.185>):
Summary of Contents for CommPlete CC2400
