System Installation and Quick Start Guide
78
61.
Type the number of the address allocation method and press ENTER.
Via DHCP Server
Type 1 to select via DHCP server. The via DHCP server option appears:
1. IP Address
:192.168.4.150
2. Subnet Mask
:255.255.255.0
3. Default Gateway
:192.168.4.150
4. Primary DNS Server
:0.0.0.0
5. Backup DNS Server
:0.0.0.0
6. Frame Type
:Type_II
7. Address Method
:via DHCP server
8. RAS Express Password
:********
9. Protocol
:Local
10.Primary Server
:0.0.0.0
11.Secondary Server
:0.0.0.0
12.Shared Secret Password
:********
Enter Selection (-(previous), q (uit), d(one), <1>): 7
To change a value, type the option number. When the option menu
appears, type the correct value and press ENTER.
Address Pool
From the Address Method menu, type 2 to select Address pool. The
Address Pool option appears:
1. IP Address
:192.168.4.150
2. Subnet Mask
:255.255.255.0
3. Default Gateway
:192.168.4.150
4. Primary DNS Server
:0.0.0.0
5. Backup DNS Server
:0.0.0.0
6. Frame Type
:Type_II
7. Address Method
:Address Pool
8. Address Pool Start
:0.0.0.0
9. Address Pool End
:0.0.0.0
10.Start 1st Exclusion
:0.0.0.0
11.End 1st Exclusion
:0.0.0.0
12.Start 2
n d
Exclusion
:0.0.0.0
13.End 2
nd
Exclusion
:0.0.0.0
14.RAS Express Password
:********
15. Protocol
:Local
16.Primary Server
:0.0.0.0
17.Secondary Server
:0.0.0.0
18.Shared Secret Password
:********
Enter Selection (-(previous), q (uit), d(one), <1>): 7
The following screen shows the start and end addresses of the
RASCard's address pool, and the start and end addresses of two optional
exclusion ranges within the pool of addresses. By using both exclusion
ranges, you can, in effect create three disconnected pools. Addresses
from these pools are allocated to users, when they call. The pool should
have one address for each port controlled by the RASCard, typically 23
for a PRI RASCard.
a. Type 8 to set the Address Pool Start address. Type the first IP address
in the pool and press ENTER.
b. Type 9 to set the Address Pool End address. Type the last IP address
in the pool and press ENTER.
Summary of Contents for CommPlete CC2400
