PAGE 22 —GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL —REV. #1 (02/25/14)
JUNCTION BOX MOUNTING
LAMP MOUNTING
SETUP
1. Securethejunctionbox (Figure8) totheadapter plate
using the supplied bolts (2), lock washer (2), and flat
washer (2). Tighten mounting bolts securely.
Figure 8. Junction Box Mounting
1. Place the GB4000 lamp fi ture onto the lamp adapter
plate pole as shown in Figure 9.
2. Insert lockingpinintoholeopeningonpole, theninsert
cotter pin to lock pin in place.
BALLOON POWER CABLE
1. Connect the balloon power cable (Figure 9) to the 10-
pin receptacle on the junction box.
JUNCTION BOX
Figure 9. Balloon Power Cable Connection
LOCKING PIN
BALLOON FIXTURE
2 FT. (10 PIN)
BALLOON
POWER CABLE
COTTER PIN
PLATE ADAPTER
POLE
LAMP
ADAPTER
PLATE
T-BAR
BOLT
(2)
POLE
LOCK
WASHER (2)
FLAT
WASHER
(2)
JUNCTION BOX