![background image](http://html1.mh-extra.com/html/multiquip/globug-gb4000/globug-gb4000_operation-and-parts-manual_1855424018.webp)
PAGE 18 —GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL —REV. #1 (02/25/14)
COMPONENTS
1.
Lamp Fixture
— Made of heat resistant polyester
balloon and four 1000-watt metal halide lamps.
2.
Locking Pin
—Locks the lamp fi ture in place when
attached to the pole on the bracket.
3.
Balloon Power Cable
— Provides AC power to the
lamps, fan and balloon inflation circuit.
4.
Adapter Plate
— Attaches to the T-Bar and mast
interface of the light tower to allow the GB4000 to be
installed.
NOTICE
This adapter plate (item4) fits most conventional light
tower masts.
5.
Junction Box
—Holds the electrical connection and
cables to connect the lamp fi ture to the T-Bar and to
the power cable.
6.
Support Bracket
— Attaches to T-Bar to support
adapter plate (hardware not shown).
7.
Connector Cap
— Provides protection to the
receptacle on the junction box when not in use.
Figure 3. GB4000 Components
1
2
3
5
4
6
7