15
Section 3
COLD CARBONATED UNITS – CONNECTING THE UNIT TO THE WATER, CO2 AND
PYTHON AND COMMISSIONING
1. If the unit is a water cooled version, the glycol module and heat dump must be
installed and connected as detailed in the Glycol module and heat dump installation
guidelines before commissioning the complete system.
5HPRYHWKHȴOOHUFDSIURPWKHOLGDQGUHGHQGVWRSIURPRYHUȵRZWXEH8VLQJD
IXQQHOȴOOWKHZDWHUEDWKZLWKIUHVKFOHDQFROGZDWHUSUHIHUDEO\EHORZr&XQWLO
ZDWHUMXVWWULFNOHVIURPWKHRYHUȵRZDSSUR[OLWUHV)LWWKHUHGHQGVWRSWRWKH
RYHUȵRZSXVKLQJKRPHWRDFKLHYHDVHDO
5HSODFHWKHEODFNȴOOHUFDSLQWKHOLG$Q\H[FHVVZDWHUZLOOQRZEHURXWHGWRDQ
LQWHUQDORYHUȵRZDQGZLOOEHHYDSRUDWHGRE\WKHUHIULJHUDWLRQV\VWHPYLDWKH
LQWHUQDOERLORWUD\
3. If required, dose the water with the provided biocide control agent in accordance
with the instructions supplied on the bottle, taking note of health and safety
instructions.
4. Connect the mains water supply to the 3\8” John Guest Bulkhead connection
on the right hand side of the unit labelled WATER IN. The mains water supply
should be regulated to a maximum of 50psi and a minimum of 20 PSI pressure is
recommended.
&RQQHFWWKH&RVXSSO\WRWKH?ȋ-RKQ*XVWEXONKHDGȴWWLQJRQWKHULJKWKDQG
side of the unit labelled CO2 IN.
6. Connect the syrup inlet lines to the syrup coils labelled SYRUPS IN 1-6.
&RQQHFWWKH6RGDUHFLUFȵRZDQGUHWXUQOLQHVZLWKLQWKHS\WKRQWRWKHFRQQHFWLRQV
labelled SODA IN and SODA OUT ensuring these connections are insulated with
VXLWDEOHDUPDȵH[
1
6
5
2
3
4
SYRUPS IN
IN
STILL
5
6
1
4
3
2
SYRUPS OUT
OUT
STILL
OUT
IN
SODA
Summary of Contents for Hyper Warwick R290
Page 37: ...37 Section 6 Iceore 10 Cold Carb Schematic Layout Hyper Warwick Schematic Layout...
Page 41: ...41...
Page 42: ...42...
Page 43: ...43...
