7.Communication with PC
(6)
Select
Save set
in the bottom menu to save current settings.
(7)
Set Wi-Fi connection on PC.
Enter the Wi-Fi settings on PC, select the oscilloscope
access point to connect, enter the set password.
(8)
Set the network parameters of the Oscilloscope Software.
Run the
software on the
computer; choose the "Ports-settings" of the "Communications" menu item. Set "Connect using" to
LAN. Set IP and Port to the same value in the oscilloscope in the step (4). If you can get data
normally, the connection is successful.
Figure 7-8 Set the network parameters of the Oscilloscope Software
Connect with PC as Wi-Fi Station
The oscilloscope and PC should be on the same network (LAN).
(1)
In the oscilloscope, push the
Utility
button. Select
Function
in the bottom menu.
119
Summary of Contents for MP720105
Page 1: ...i Digital Storage Oscilloscope Model MP720105 MP72016 MP72107...
Page 40: ...4 Advanced User Guidebook Figure 4 2 Rectangle window Figure 4 3 Blackman window 35...
Page 41: ...4 Advanced User Guidebook Figure 4 4 Hanning window Figure 4 5 Kaiser window 36...
Page 68: ...4 Advanced User Guidebook Sine x x interpolation Linear interpolation 63...
