multicomp pro MP720105, Manual

Page: 107 / 154

(1)
(2)
(3)
(4)




Enter the operation menu: Push (single-channel) or (dual-channel)
button. Select Arb in the bottom menu, select Others in the right menu, and select
New .
Set the number of waveform points: Select Points in the right menu, turn the M
knob to change the value, or use the input keyboard (push the M knob to show it) to
input the value and choose the unit. X1 , X1000 , Xle6 , Xle9 in the keyboard
respectively represent 1, 1000, 1000000, 1000000000. The waveform points range is
2 - 8192.
Set the interpolation: Select Intrpl in the right menu, choose between On / Off . If
you choose On , the points will be connected with beelines; otherwise, the voltages
between two consecutive points will not change, and the waveform looks like a
step-up one.
Edit the waveform points : Select Edit Points in the right menu.
Select Point , input the number of the point to be edited.
Select Voltage , input the voltage for the current point.
Repeat the step above, set all the points to your needs.
Select Save , enter the file system.
If you want to save the waveform to internal memory, select Memory in the right
menu as Internal . Turn the M knob to select a file from USER0 through USER31.
Select Save in the right menu.
5.Use the Arbitrary Function Generator (
MP720106
)
Amplitude/High Level, Offset/Low Level, New, File Browse, Built-in. You can operate
the menu by using the menu selection buttons on the right.
To set the Frequency/Period, Start Phase, Amplitude/High Level, Offset/Low Level, please
refer to To Output Sine Signals on page 99.
The Arbitrary signal consists of two types: the user-definable waveform and the system
built-in waveform.
Create a New Waveform
File size
Last modification time
Waveform graph
If a USB device is connected, and you want to save the waveform to it, select
Memory in the right menu as USB . The instrument lists a directory of the folders and
files on the USB memory device. Select a folder or file using the M knob to scroll up
102