4.Advanced User Guidebook
Copy:
You can save the waveform by just pushing the
Copy
panel button in any
user interface. The source wave and the storage location are according to
the settings of the
Save
function menu when the Type is
Wave
. For more
details, please see "
How to Print the Screen Image
To print an image of what appears on the oscilloscope screen, do as the follows:
(1)
Connect the printer to the
USB Device port
on the rear panel of the oscilloscope.
Note: The USB Device port supports PictBridge
compatible printers.
(2)
Push the
Utility
button, select
Function
in the bottom menu, select
Output
in the
left menu.
(3)
In the bottom menu, select
Device
as
PICT
. (When
PC
is selected, you can get
an image by Oscilloscope software.)
(4)
In the bottom menu, select
Print Setup
. In the right menu, set up print parameters.
The
On
selection of
Ink Saver
will print out a copy with a white background.
(5)
Once you have connected a printer to your oscilloscope and set up print
parameters, you can print current screen images with a single push of the
button on the front panel.
97
Summary of Contents for MP720105
Page 1: ...i Digital Storage Oscilloscope Model MP720105 MP72016 MP72107...
Page 40: ...4 Advanced User Guidebook Figure 4 2 Rectangle window Figure 4 3 Blackman window 35...
Page 41: ...4 Advanced User Guidebook Figure 4 4 Hanning window Figure 4 5 Kaiser window 36...
Page 68: ...4 Advanced User Guidebook Sine x x interpolation Linear interpolation 63...
