100
Route Finder RF500S User Guide
7.
Click Properties.
8.
On the
General tab, in the preferred Server field, enter the name of your Novell Server Domain.
Select the First Network Drive and Enable Logon Script processing.
9.
Click OK.
Network Protocol:
Windows 95/98:
1.
In the Network dialog box,
Configuration tab, select IPX/SPX Compatible Protocol.
2.
Click Properties.
3.
Disable Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks.
This will ensure that when you log into your NT server, Windows will use the TCP/IP protocol.
Next, you must
enable Client for Microsoft Networks.
Set Your Identification:
Windows 95/98:
1.
In the Network dialog box, select the
Identification tab.
2.
In the
Workgroup field, enter the name of your NT domain or the name of your workgroup as
provided by your Network Administrator.
3.
Enter a name and description for your computer in the fields provided.
4.
Click OK.
Summary of Contents for RoteFinder RF500S
