71
6.1
Introduction
The menu system for the MultiFRAD provides a set of user-friendly
configuration menus that are accessible from a main menu. The Main
Menu contains five options that allow you to configure your MultiFRAD;
display statistics; reset the unit or data port; run diagnostic tests, and
exit the command mode.
To select one of the options from the Main Menu, enter the number
corresponding to the option and press ENTER. A submenu is displayed
that allows you to configure your MultiFRAD, display statistics, or run
one of many diagnostics tests.
6.2
Configurations Menu
From the Configurations menu you can configure the data port or trunk,
restore factory defaults; store all current configurations; or return to the
Main Menu.
Configurations
1 - Data Port Configuration
2 - Trunk Configuration
3 - Factory Default Configuration Options
S - Store All Configurations
M - Main Menu
P - Previous Menu
Selection: _
To configure the data port or trunk, enter the corresponding option
number and press ENTER. To change to factory defaults, enter number
3 and press enter. You can set factory defaults for the entire unit or for
either the data port or trunk. Select the option you wish to change, and
Summary of Contents for MultiFRAD 100-Series
