Copyright Müller-Elektronik GmbH & Co.KG,
Installation and operating instructions SPRAYDOS (07.2016)
Page - 17 -
>
Press the „working width " key
>
> Enter the value using the keys
and
>
> Press
to transfer the new value
6.2.2
"Impulses/100m" key
With this key the number of impulses which the speed sensor records to the computer is entered.
There are two possibilities to enter the data:
1. The impulses/100m value is known
>
Press
>
Enter the value using the keys
and
>
Press
to transfer the new value
2. The impulses/100m value is not known
>
Measure out and mark a distance of 100m on the field
>
Bring the vehicle to the start position
>
Press
and
simultaneously
>
Travel a distance of 100m and stop. The computer counts the impulses during the journey
>
Press
to transfer the new value
6.2.3
"Number of boom sections" key
This key is used to enter the number of boom sections (max. 9) and the number of nozzles for each boom section.
The boom sections are numbered from left to right as seen from the direction of driving.
During input, the boom sections are displayed on the left hand side and the number of nozzles on the left hand side.
Procedure:
>
Press
on the left a 1 (boom section 1) is displayed and on the right the number of nozzles.
>
To alter the number of nozzles, enter the new value using the keys
and
.
>
Press
the value is now stored in the memory. On the left hand side of the display a 2 (boom section 2) appears. If the
value – number of nozzles – on the right hand side of the display is correct, press
to transfer the value and
select boom section 3. This process can be carried on until the 9
th
boom section is reached. Subsequently the total
number of boom sections and nozzles will be displayed.
>
If e.g. the field sprayer has 5 boom sections, enter a 0 when the 6
th
boom section is displayed. The computer then
sets the boom sections 7-9 automatically to 0. In this case the computer operates on the basis of 5 boom sections
and displays the number of boom sections and the total number of nozzles as 5:30.
6.2.4
"Pre-set rate - l/ha" key
The required spray rate is communicated to the computer using this key. If the switch is in automatic position
the
electronics control the pressure and subsequently the spray rate automatically.
