Copyright Müller-Elektronik GmbH & Co.KG,
Installation and operating instructions SPRAYDOS (07.2016)
Page - 11 -
4.2
System description
The SPRAYDOS can be installed on the field sprayer as a fully automatic control instrument. The device carries out an
area-related control of the spray rate regardless of the current speed, the working width and the pre-set rate.
The calculation of the current spray rate, speed, working area, total area, quantity spray as well as the total quantity and the
working time is carried out continuously.
The device consists of the
computer
[1] and the
console
[2-5]
.
A wheel/cardan speed sensor [9] can be connected directly to SPRAYDOS in order to determine the speed.
The SPRAYDOS can be connected directly to the signal socket [10] on the tractor using a connecting cable. By means of a
switch integrated in the connecting cable it is possible to switch between wheel/cardan and a radar device.
CAUTION
If the SPRAYDOS is being used on a trailed field sprayer, no speed sensor is to be connected to
the SPRAYDOS. In this case the speed is measured at the wheel of the field sprayer.
The field sprayer is connected by means of the machine plug (circulation, hydraulic) on the SPRAYDOS.
CAUTION
During transport the SPRAYDOS must be switched off.
If available, the drawbar or axle steering must be set to centre position during transport.
