Table of contents
30303187-02-EN
V1.20180921
5
“Impulses Main Flow” parameter
“Stirring off Below” parameter
“Maximum Wind Speed” parameter
“Extremity nozzles set” parameter
Calibrating the flow meter with the tank method
Calibrating the flow meter with the nozzle method
Manually entering the number of impulses per liter for the flow meter
Combining the flow meter with the pressure sensor
Selecting and configuring the speed sensor
Calibrating the speed sensor with the 100m method
Configuring the reverse driving sensor
Entering the number of nozzles per section
Switching sections off permanently
Permanently switching off a section using a sensor
System delay when switching the sections
Changing the display of areas on the terminal
Configuring the nozzles - for field sprayers with pressure sensor regulation
Configuring the extremity nozzles
Operating the extremity nozzles
Entering the field sprayer geometry
Calibrating the sensors for reproducing the boom slope
Field sprayer with two circulations and job computers
Geometry on a field sprayer with two job computers