Mounting and installation
Connecting the job computer to the ISOBUS
4
30303187-02-EN
V1.20180921
21
⇨
You have connected and locked the connector with the socket.
Separating the AMP connectors
This is how to separate two AMP connectors:
1.
Press in both ends of the red locking device in direction of the connector.
⇨
You will hear a loud clicking sound.
⇨
The locking device has been released.
2.
Pull out the red locking device of the AMP socket all the way to the end.
3.
Pull the connector out of the socket.
Connecting the job computer to the ISOBUS
To connect the job computer to the power supply and to the ISOBUS terminal, you have to connect
the ISOBUS cable to an ISOBUS power socket on the tractor.
This is how to connect the job computer to the ISOBUS:
1.
Take the ISOBUS cable from the job computer.
2.
Unscrew the dust protection cap.
⇨
3.
Insert the ISOBUS connector into the ISOBUS power socket on the tractor.
4.
Lock the connector. For basic vehicle harnesses from Müller-Elektronik, turn the connector
clockwise. For other ISOBUS basic vehicle harnesses, the procedure depends on the model.
⇨
The connector fits tightly.
5.
Screw the dust protection cap of the connector and the socket together.
4.1.3
Procedure
4.2
Procedure
