Muller Elektronik MAXI 3.0, Operating Instructions Manual

Page: 4 / 90

Table of contents
4 V1.20180921 30303187-02-EN
5.2.1 Spray data area 25
5.2.2 Boom display area 27
5.2.3 Icons beside the implement image 28
5.2.4 Icons on the implement image 31
5.3 Control units 32
6 Operating job computer on the field 33
6.1 Tank filling 33
6.1.1 Filling up the tank manually without additional systems 33
6.1.2 Filling up the tank with TANK-Control 33
6.1.3 Filling up the tank with TANK-Control and fill stop 34
6.2 Controlling the boom 35
6.2.1 Lifting and lowering the boom 36
6.2.2 Locking the boom 36
6.2.3 Folding and unfolding the boom 37
6.2.4 Raising and lowering the wings (tilting up / down) 39
6.2.5 Sloping the boom 40
6.2.6 Reproducing the boom slope when turning 40
6.3 Starting application 42
6.4 Regulating the application rate 43
6.4.1 Changing the application rate in manual mode 43
6.4.2 Using Automatic mode 44
6.4.3 Setting target rate 45
6.4.4 Stopping application 46
6.5 Operating sections 46
6.6 Documenting work results 46
6.7 Operating the ME joystick 47
6.7.1 Preview mode for the ME Joystick 48
6.7.2 Viewing the assignment of the joystick 49
6.8 Using foam markers 49
6.9 Operating additional functions 50
6.10 Regulating the drop size with AIRTEC 51
6.10.1 Switching the air compressor on and off 52
6.10.2 AIRTEC in automatic mode 53
6.10.3 AIRTEC in manual mode 53
6.11 Using the ISB short-cut button 54
7 Configuring the job computer 55
7.1 Entering field sprayer parameters 55
7.1.1 “Nozzle” parameter 55
7.1.2 “Target Rate” parameter 56
7.1.3 “Working Width” parameter 56
7.1.4 “Wheel Impulses” parameter 56
7.1.5 “Minimum Pressure” parameter 56
7.1.6 “Maximum Pressure” parameter 56
7.1.7 “Sprayer off Below” parameter 56
7.1.8 “Regulation off Below” parameter 56
7.1.9 “Regulation Factor” parameter 57