muli ST+PX Page 40 User Manual Download

Page: 40 / 75

Handlebars, stem and stem adapter must be bolted according to the torques in-

dicated on the components. The corresponding torques can also be found listed

in the section „Recommended screw torques“.

The e-muli has a height-adjustable

stem adapter. This adapter allows

the stem and handlebars to be ad-

justed in height by 10 cm. This allows

the handlebar height to be adjusted

to different riders but also load con-

ditions in the cargo basket. Especial-

ly when transporting children in the

e-muli child seat, this height adjust-

ment allows the children more hea-

droom when the child seat is moun-

ted in the direction of travel.

Make sure that the quick-release lever of the stem ad-

apter is always firmly closed while riding and that the

handlebars do not move in height.

Turning in the handlebar for transport and parking

In addition to height adjustment, the stem

adapter also allows the handlebars to be

turned in sideways, making the e-muli even

more compact for parking - in a hallway, for

example.

•

To turn in the handlebars, open the

quick release on the stem adapter, pull

the handlebars up as far as they will go

and turn them in sideways in this highest

position.

•

Hereupon you can guide the turned

handlebar back down and lock it by

quick release. To then turn the handle-

bar back to the normal riding position,

guide the handlebar back to the highest

position and turn it out.

•

Note that the handlebar can only be tur-

ned in and back again in the top position!

Perform regual visual inspections for damage, dents, cracks, wob-

bling on the stem adapter. Do not ride with a damaged stem adap-

ter. The component is highly relevant to safety. If the stem adapter

is damaged, have it replaced by one of our specialist dealers.

Handlebar and stem

Summary of Contents for ST+PX












































































Search results

Summary of Contents for ST+PX

Reviews:

Related manuals for ST+PX

Brands by name

Popular brands

muli ST+PX, User Manual

Search results

Summary of Contents for ST+PX

Reviews:

Related manuals for ST+PX

Brands by name

Popular brands