muli ST+PX, User Manual, Page: 17 / 75

32 33
Adjusting the seat length and saddle angle
The distance between the saddle and
handlebar grips can be adjusted somew-
hat by moving the seat post slide. It should
be noted that moving the saddle changes
the pedaling angle on the pedals.
By loosening the screw on the seat post
carriage, you can also adjust the seat
angle of the saddle.
To adjust the seat length and the saddle
angle, you must loosen the hexagon so-
cket screw on the saddle support carria-
ge with an appropriate wrench and 2-3
turns. Be careful not to unscrew the screw
completely. Then set the desired position
and angle of the saddle and tighten the
screw again. Make sure that the saddle
again in a horizontal line determine.
After adjustment, make sure that the
saddle cannot be twisted or tilted by
pulling and pushing on the front and
back of the saddle with your hands.
Under no circumstances should the saddle be fixed in a
tilted back position.
Turning gear and brake levers
You can adjust the shift and brake
levers on the handlebars to suit your
seating and hand position. To do this,
loosen the Allen screw on the shift
and brake levers and turn them to
the desired position and tighten the
screws again.
In the riding position, test whether
you can easily reach the shift and
brake levers with your fingers. Also
make sure that the forearm and bra-
ke lever form a line in the riding posi-
tion.
After completing the adjustment,
make sure that the shift and brake
levers cannot be twisted.
No bar ends may be installed on the e-muli.
be installed on the muli.
Adapting the e-muli to the rider