muli ST+PX, User Manual

Page: 57 / 75

112 113
The muli child seat is made of high strength waterproof textile with reinforced and
padded backrest and two aluminum rods to hang the seat in the cargo basket.
The cargo basket has two opposing
mounts at the front and rear for the child
seat and rain cover. A locking bolt with
spring balancer is located on each of the
mounts. The end pieces of the seat bars
are inserted into these holders. The seat
offers space for two children and may be
loaded with a maximum of 40kg. A child
may be transported in the child seat up to a maximum weight of 22kg and a
height of 120cm. Never use the seat for children who are not yet able to sit in-
dependently.
The child seat has two 3-point safety belts that can be adjusted in length and
height. The child seat buckles snap magnestically into the holder. Because of the
hanging system and the textile material, the seat also absorbs light road shocks
and children sit very comfortably. Nevertheless, when driving with children, avo-
id driving over steep bumps, such as curbs, to keep the impact on the children
as low as possible. Thanks to the high backrest, the seat also offers children
protection in the neck and head area. In addition, the seat can be installed both
in and against the direction of travel.
Before each ride, check the seam, rivet, plug-in, belt and screw connections for
strength and integrity.
Note the maximum load of the seat of 40kg. The maximum allowed height
of a child is 120cm and the maximum weight is 22kg. These values must
not be exceeded, otherwise you risk breaking or failure of the seat, which
may result in serious injury.
Regularly check the seams, rivets, plug-in connections, belts
and screw connections of the child seat for strength and in-
tegrity. Do not transport children in a defective child seat,
otherwise you risk serious injuries.
Child seat and child transport in the e-muli