muli ST+PX, User Manual

Page: 35 / 75

68 69
The Pendix eDrive 300 is a system with a gearless mid-motor that delivers 250
W of power. The built-in battery has a capacity of 300 Wh and weighs 2.3 kg.
The total weight of the drive system including the motor is 6.9 kg.
Inserting and removing the battery
Before riding, insert the battery into the holder provided for this purpose, which
is attached to the steering tube of the e-muli.
By turning the battery to the left while applying slight downward pressure, you
can fix the battery on the holder. The sound of a click and a brief illumination of
the LED display of the battery indicates the proper installation of the battery.
However, this does not yet activate the electric drive.
When inserting the battery, make sure that the contacts and the holder are free
of small objects and dirt and are also dry.
The battery is removed with an opposite rotary movement.
Pull the battery vertically upwards until it is completely lifted out of the holder,
the space up to the top tube is sufficient for this.
Be careful not to tilt the battery sideways before it is completely lifted out of
the holder.
This risks bending and breaking the connecting elements of the battery and the
bracket.
Switching the drive on/off
Activate the drive by pressing the On/Off button on the battery.
Depending on the charge status, the LED display now lights up in either green,
yellow or orange. Press the key again to deactivate the drive and the LED display
goes out.
The e-muli is also functional with the electric drive deactivated.
In deactivated mode, the Pendix drive causes hardly any increased pedaling re-
sistance. Please do not operate the system while riding and always keep both
hands on the handlebars.
Setting the support levels
The Pendix drive comes without dis-
play and control unit on the handle-
bar. All available settings are made
directly on the battery. The Pendix
drive has three support levels: ECO,
SMART and SPORT. These define
the strength of the pedal assistan-
ce. You can adjust the levels using
the rotary switch on the battery. The
straight line on the on/off button in-
dicates the selected level.
If you do not want to remove the battery during shorter stops, you can secure it
against theft with a safety bracket attached to the lower area of the battery. To
do this, pull the steel bracket out of the battery and secure it to the bike with a
suitable lock.
Battery and control unit
Pendix eDrive 300