45
Bearings Cont.
Location: Greaseable Bearings
This style of bearing can be greased.
• (1) per transmission jack shaft, inner section.
Total of (2).
#1-2 in Figure-3.
• (2) per shift lever.
Total of (4).
#3-6 in Figure-3.
Grand Total:
(6)
Figure-3
Grease Points
1
1
22
33
44
55
66
Greasing
1. See
Lower Seats Removal
under
Accessing the Mudd-Ox
to remove the lower operator seat.
2. See
Battery Removal
under
Electrical
to remove the battery.
3. Locate the (6) greaseable bearings as shown in Figure-3.
4. For each bearing, there is a grease zerk on the bearing flange/block itself. Connect the grease gun onto the
fitting as shown in Figure-5. Slowly pump grease into the bearing flange. Once it begins to seep out of the
flange/block, immediately stop.
Note:
If the grease is only seeping around the grease gun tip, the tip is not fully
connected to the grease fitting.
Figure-4
Inner Bearing
Figure-5
Grease Gun Connected