MTU 20 V 4000 G23 Technical Publication Download Page 98

Page: 98 / 178

Task Description

Task Description

6.1

Engine

6.1.1

Engine – Barring manually

Preconditions

• Engine is stopped and starting disabled.

Special tools

Designation / Use

Part No.

Qty.

Barring tool

F6555766

Ratchet

F30006212

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury — danger to life!

• Before barring the engine, ensure that nobody is in the danger zone.

Engine – Barring manually

1. Remove guard plate.
2. Engage barring tool (2) with ring gear (3) and

mount on flywheel housing.

3. Set ratchet (1) onto barring tool (2).
4. Rotate crankshaft in engine direction of rotation.

Apart from the normal compression resistance,
there should be no abnormal resistance.

5. For barring-tool removal follow reverse sequence

of working steps.

M015715/00E 06-08

Summary of Contents for 20 V 4000 G23



















































































































































































Search results

Summary of Contents for 20 V 4000 G23

Reviews:

Related manuals for 20 V 4000 G23

Brands by name

Popular brands

MTU 20 V 4000 G23, Technical Publication

Search results

Summary of Contents for 20 V 4000 G23

Reviews:

Related manuals for 20 V 4000 G23

Brands by name

Popular brands