MTU 20 V 4000 G23 Technical Publication Download Page 133

Page: 133 / 178

128

Task Description

6.12

Lube Oil System / Lube Oil Circuit

6.12.1

Engine oil – Change

Preconditions

• Engine is stopped and starting disabled.
• Engine is at operating temperature.

• MTU Fluids and Lubricants Specification (A001061/..) is available.

Special tools

Designation / Use

Part No.

Qty.

Torque wrench

F30027337

Ratchet adapter

F30027341

Material

Designation / Use

Part No.

Qty.

Engine oil

Spare parts

Designation / Use

Part No.

Qty.

Sealing ring

WARNING

Hot oil.
Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.

• Do not inhale oil vapor.

Oil change without semirotary hand pump: Draining oil at drain plug(s) on oil pan

1. Provide a suitable container in which to collect the oil.
2. Remove drain plug(s) and drain oil.
3. Install drain plug(s) with new sealing ring.

Oil change using semirotary hand pump: Oil extraction

1. Provide a suitable container in which to collect the oil.
2. Extract all oil from oil pan using the hand pump.

M015715/00E 06-08

Summary of Contents for 20 V 4000 G23



















































































































































































Search results

Summary of Contents for 20 V 4000 G23

Reviews:

Related manuals for 20 V 4000 G23

Brands by name

Popular brands

MTU 20 V 4000 G23, Technical Publication

Search results

Summary of Contents for 20 V 4000 G23

Reviews:

Related manuals for 20 V 4000 G23

Brands by name

Popular brands