Diaphragm – Check
1.
Remove cover (4).
2.
Remove spring (5), gasket (2) and dia-
phragm (3).
3.
Check diaphragm (3) for damage, fit new dia-
phragm if used one is damaged.
4.
Install diaphragm (3) on housing (1).
5.
Install new gasket (2) and spring (5) together
with cover (4).
6.
Use torque wrench to tighten screws of cover (4) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
Tightening torque
10 Nm −2 Nm
7.
Check diaphragm in other oil separators in the same way.
MS150031/06E 2016-010
| Crankcase Breather | 153
TIM-ID: 0000000017 - 011
