7.20 Engine Mounting / Support
7.20.1 Engine mounting – Checking condition of resilient mounts
Preconditions
☑
Engine is stopped and starting disabled.
☑
Engine is filled with engine coolant and engine oil.
☑
Engine is under static load.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Caliper, 300 mm
Y20000275
1
Engine mounting – Checking
condition of resilient mounts
1.
Measure height setting (b) with feeler gauge.
2.
Measure dimension (a) with Vernier caliper.
3.
Calculate permissible value of dimension (a),
considering the measured value of height set-
ting (b):
• Reference values: The permissible value of
dimension (a) is 145 mm when
(b) = 5 mm.
• When measured height setting (b) = 6 mm,
the permissible value of dimension (a) is
146 mm.
• When measured height setting (b) = 4 mm,
the permissible value of dimension (a) is
144 mm.
4.
Replace the resilient mount, if the measured
value of dimension (a) is lower than the per-
missible value.
MS150031/06E 2016-010
| Engine Mounting / Support | 217
TIM-ID: 0000007554 - 005
