Cleaning strainer
1.
Shake coarse contamination out of strainer (5).
2.
Clean all metallic parts with cleaner (Snow-White 11-0), then rinse with cleaner (Hakupur 312).
3.
Use a soft brush to remove stubborn deposits from strainer if required. When doing so, take care not to
damage the mesh.
4.
Blow out strainer (5) with compressed air from inside.
Checking strainer
Item
Findings
Action
Strainer
Metallic residues
•
Clean
•
Monitor engine operation
•
Check strainer daily
•
Notify Service
Strainer
Damaged
Fit new part
Square-section ring
Damaged
Fit new part
O-ring
Damaged
Fit new part
Installing strainer
1.
Coat square-section ring (4) on strainer (5) with engine oil and install strainer (5).
2.
Insert strainer into housing.
3.
Fill housing with new engine oil.
4.
Coat O-ring (3) with engine oil and fit in filter housing.
5.
Fit cover (2) and secure with screws (1) and washers.
180 | Task Description | MS150035/01E 2013-11
TIM-ID: 0000036227 - 004
