2 Product Summary
2.1 Engine Layout
2.1.1 Product description
Description of the engine
Engine
The engine is a liquid-cooled four-stroke diesel engine, rotating counterclockwise (seen from driving
end), with direct injection, sequential turbocharging and charge-air cooling.
The engine is monitored by an engine control and monitoring system (ADEC).
Fuel system
Electronically controlled common-rail-injection system with HP pump, pressure accumulator (rail) and
single injectors with integrated individual store.
The electronic control unit controls
• Injection start
• Injection quantity
• Injection pressure
Exhaust system
The exhaust system is equipped with triple-walled, water-cooled exhaust lines.
The triple-walled design permits
• low surface temperature,
• reduced amount of heat to be dissipated by the coolant,
• absolute gas-tightness.
Turbocharging
Sequential turbocharging with internal, engine-coolant-controlled charge-air cooling. The right-hand ex-
haust turbocharger is cut-in and cut-out on 12V and 16V engines with electronically-controlled, hydraul-
ically-actuated flaps.
Cooling system
Split-circuit engine cooling system with remote or engine-mounted heat exchanger.
Heating of the charge air in idle and low-load operation prevents white smoke formation.
Seawater flows only through engine coolant cooler and fuel cooler as well as the raw water pump (if
fitted).
Service block
The service components are mounted on the auxiliary PTO end.
The layout permits easy access for maintenance.
Service-components:
• Raw water pump (if applicable), coolant pump
• Centrifugal lube oil filter
• Coolant expansion tank (only on engines with engine-mounted heat exchanger)
• Coolant filter
14 | Product Summary | MS150035/01E 2013-11
TIM-ID: 0000010054 - 008
