Output
Interface
Ethernet POWERLINK
Data protocol
POWERLINK V2 according to IEEE 802.3
Measured value
Position, velocity / option: multi-position measurement (2…4 positions)
Measurement parameters
Resolution
1 μm, 2 μm, 5 μm, 10 μm, 50 μm or 100 μm (selectable)
Cycle time
1.0 ms up to 2400 mm stroke length,
2.0 ms up to 4800 mm stroke length,
4.0 ms up to 5080 mm stroke length
Linearity
14
< ±0.02 % F.S. (minimum ±50 µm)
15
Repeatability
< ±0.001 % F.S. (minimum ±2.5 µm) typical
Hysteresis
< 4 µm typical
Operating conditions
Operating temperature electronics
−40…+75 °C (−40…+167 °F)
Operating temperature rod
−40…+100 °C (−40…+212 °F)
Humidity
90 % rel. humidity, no condensation
Ingress protection for sensor electronics
16
IP67
Ingress protection sensor rod with
connecting cable for side cable entry
16
IP65
Ingress protection sensor rod with single
wires and flat connector with bottom
cable entry
16
IP30
Shock test
100 g (single shock), IEC standard 60068-2-27
Vibration test
10 g (10…2000 Hz), IEC standard 60068-2-6 (resonance frequencies excluded)
EMC test
17
Electromagnetic immunity EN 61000-6-2
Electromagnetic emission EN 61000-6-3
Operating pressure
350 bar (5076 psi); Peak: 700 bar (10 152 psi)
Magnet movement velocity
Any
Design / Material
Sensor electronics housing
Aluminum
Sensor flange
Stainless steel 1.4305 (AISI 303)
Sensor rod
Stainless steel 1.4306 (AISI 304L)
Stroke length
25…5080 mm (1…200 in.)
Mechanical mounting
Mounting position
Any
Mounting instruction
Please consult the technical drawings
Electrical connection
Connection type
2 × M12 female connector (4 pin), 1 × M8 male connector (4 pin)
Operating voltage
18
+24 VDC (−15 / +20 %)
Ripple
≤ 0.28 V
PP
Current consumption
18
110 mA typical
Dielectric strength
500 VDC (DC ground to machine ground)
Polarity protection
Up to −30 VDC
Overvoltage protection
Up to 36 VDC
11.3 Technical data of Temposonics
®
RD4
14/
With position magnet # 251 416-2
15/
For pressure fit flange »S« the linearity deviation can be higher in the first 30 mm (1.2 in.) of stroke length
16/
The IP rating is not part of the UL approval
17/
Sensor rod and connecting cable have to be mounted in a metal housing (e.g. in a cylinder)
18/
Power supply must be able to provide current of 1 A for power up process
Temposonics
®
R-Series Powerlink V2
Operation Manual
I 49 I
