MS ENERGY e21, Instruction Manual

Page: 298 / 332

ENG
17
5. LED DISPLAY
Instructions of buttons
1.
Power Switch
:
Long press the Power button to turn on/off e Scooter.
2.
Function / Light button:
A
: Short press the
Function
button
once
: Cycle to switch gears:
Pedestrian mode
: Gear indicator is not displayed.
The pedestrian indicator flashes.
MAX SPEED 6 km/h
Normal mode
: Gear indicator shows
White
.
MAX SPEED 15 km/h
Sports mode
: Gear indicator shows
Red. MAX SPEED 25 km/h
B
: Short press the
Function
key
2x
: turn On/Off the front and rear lights
When the front lights are on, the taillights are always on
3.
Accelerator
:
Press throttle to start and accelerate.
Note : If non‐zero start is default seting, then then you have to push the scooter with
your foot to have a speed ≥ 3km/h for the throttle to be active.
4.
Brake
:
Hold the brake handle to brake. If necessary lightly step on the rear fender to assist
the brakes.
5.
Cruise mode
:
After the constant speed cruise function is turned on, maintain the current
vehicle speed for 8 seconds (vehicle speed ≥ 6km/h) and the cruise mode
will activate automatically. Cruise mode is deactivated when pressing the
acceleration dial again or holding the brake firmly.
Note: When the brake is active, pressing the throttle button to accelerate is invalid!
Multifunction (opt)
Gear indicator
Speed unit
Fault display
Speed
Battery level