MS ENERGY e21, Instruction Manual

Page: 296 / 332

ENG
15
4. CHARGING
IMPORTANT:
Before you start charging the battery, please carefully read
warnings about Batteries and Carger in chapter "
IMPORTANT SAFETY INSTRUCTIONS"
The protective cover of the e‐scooter charger socket must
always be properly positioned in it's place to prevent water or dust
entering. Otherwise, moisture or impurities may cause short circuits or
unit malfunction! Defects caused by user negligence are not covered by
the warranty
The Charging time is influenced by temperature. Higher ambient
temperatures will cause a longer charging time.
Charge the battery in normal room temperature environment!
Never leave the scooter on the charger unattended!
Note: Please Charge the Scooter Battery firstly before first use.
1. Open rubber cap.
2. Insert in the charging plug firstly. Then plug in Charger into power socket!
While Charging process, the light on charger will be red. When Battery is
full, the charger led indicator turn green.
After charging is completed, disconnect Charger from Power socket
firstlly, then disconnect charging plug from e‐scooter.
3.
Close the rubber cap!
1 2 3