USER MANUAL AMPRO
plus
MRU GmbH, D-74172 Neckarsulm
57 / 100
8
Data storage
8.1.
Organize data storage
.
The basis for the data storage of the analyzer is saved sets of sites inside the ana-
lyzer. Each site has a distinct site number as well as 8 additional free text lines for
names and address.
The analyzer can store up to 32,000 different sites.
Sites can be newly created and changed in the analyzer, or are transferred e.g.,
via a PC - program by means of ZIV - module.
NOTE
New sites created in the analyser will NOT be transferred
back to the computer program. When transferring data
from the analyser to the computer only measurement data
will be transferred, identified by the site number that has
been assigned to the measurement, when the measure-
ment was saved.
Measurements are stored by assigning them to a site. Measurements can be gas
measurements or other measuring programs available in the analyser.
8.2.
Call up information about Memory info
In the menu item "storage" you select „memory info“ to get information about
the actual memory volume. The part of free memory, the total number of the
stored sites and the number of the measurements stored all together, split in
the kind of the measurement is listed.
►
Go to the Measurement menu.
►
Press F2.
The Storage menu appears.
►
Select Memory info.
►
Press OK.
Das Menü Speicher Info erscheint.
The menu Memory info appears.
Information about the data storage is listed.
